Skip Navigation Website Accessibility
 


PRS Sonzera 20W 1x12 combo // 120V (USA)

available at

Low in-store inventory, may be subject to change.

Description

The Sonzera 20 is a moderately powered 20-watt combo amplifier with two independently controlled, footswitchable channels designed for maximum versatility. The clean channel delivers full, 3D tones reminiscent of American mid-1960’s amplifiers. The gain channel is related to the clean channel circuit-wise, so that it can be set up to act as a boosted clean channel or manipulated to make the channels sound like two completely different amps (the gain channel can be set from slight to very heavy distortion by simply using the drive and level controls). The bright switch on the gain channel has been carefully tailored to deliver familiar high-end snap and is particularly effective on the low strings, neck pickup settings, and with singlecoils, while the low-end response of the gain channel is full, tight, and clear. Both channels on the Sonzera are designed to maximize note clarity and definition. The global presence control and the tone stacks allow players to dial in a variety of tones from bell-like chime to warmer, thicker tones. The Sonzera 20 Combo also features global spring reverb control that is designed to enhance notes without clouding them. The reverb can be turned on and off via the footswitch. The addition of a built-in effects loop allows players to use all their time-based effects with ease without negatively impacting the overall tone of the amp. With robust construction, a wide range of tones, and steadfast controllability, the Sonzera 20 Combo is a solid gig- and studio- worthy amplifier.

Features

  • Upgraded with aesthetic improvements, cutting-edge circuit mods, and bolstered durability
  • 2 footswitchable channels achieve a stunning array of tones
  • Clean channel's three-dimensional tones evoke vintage American amplifiers
  • Gain channel yields everything from boosted cleans to saturated distortion
  • Sculpt each channel with independent tone controls
  • Dial in the perfect level of intensity with the global Presence knob
  • Bright switch adds a high-end snap to your lead tones
  • Great-sounding 12-inch Celestion V-Type speaker
  • 4-/8-/16-ohm speaker outputs for connecting an extension cabinet
  • Built-in effects loop integrates your time-based effects without impacting your tone
  • Rich-sounding footswitchable reverb

Attributes

  • Total Power: 20W to 49W
  • Color: Black
  • Power Tube: 5881

Technical Specifications

  • Amp Type: Combo Amp
  • Wattage: 20W
  • Type: Tube
  • Features: Effects Loop
  • Dimensions: 18" H x 21.5" W x 10" D
  • Weight: 49 lbs
  • Power Tubes: 2 x 5881
  • Preamp Tubes: 6 x ECC83S
  • EQ: 3-Band EQ, Prescence
  • Inputs: 1 x 1/4"
  • Outputs: 2 x 1/4" (8 ohms), 2 x 1/4" (4 ohms), 1 x 1/4" (16 ohms)
  • # of Channels: 2
  • Footswitch: 1 x 1/4"
  • Footswitch Included: Yes, 2-button footswitch
  • Construction Material: Poplar Plywood with Black Tolex
  • Power Source: Standard IEC AC cable
  • Mono/Stereo: Mono
  • Speakers: 12" Celestion V-Type 70W
  • Effects: Reverb
  • Speaker Configuration: 1x12"